OK so here's the weirdness...
I got my Level out of the garage and checked to make sure that my driveway was level horizantallly. It was.
I then pull the NSX into the spot I had just measured.
Then I opened the trunk and placed the level on the frame beam that is above the tail lights.
It checked out level. Dead on Level.
So, then I decided to get a solid measure and measure the hight from the inside edge of the rear wheel well directly over the hub on both sides.
Now, the passenger side is 3/10's of 1" lower than the driver side.
I can deal with 3/10's of an inch for now. I'm not sure what's going on with the car.
When you lift the car up and then set it back down, does the shock/spring need to settle for a while before I can get an accurate measurement?
See you guys @ C&C 5/3.