Winter Projects; The Turbo Encabulator

Jan 25, 2012, 5:44 pm
#1
Joined: Mar 11, 2007
Posts: 2,411
Some of this information has been helpful toward my winter rebuild of the MGB, so I though some of you could benefit from the basic engineering principals outlined here. Old school technology, yes, but sometimes it helps to go back to where we started from in order to perfect our efforts to supress side tremmy to the trunion bearings and eliminate this all to common failure in our cars.

http://www.youtube.com/watch?v=rLDgQg6bq7o
Jan 26, 2012, 2:07 am
#2
Joined: Aug 5, 2007
Posts: 2,352
I think the biggest take away from this is how they achieved the main winding was of the normal lotus-o-delta type placed in panendermic semi-boloid slots in the stator, every seventh conductor being connected by a nonreversible trem'e pipe to the differential girdlespring on the up-end of the grammeters.

That was and still is some very heavy stuff!
1983 Datsun 280ZXTurbo
Jan 26, 2012, 11:35 am
#3
Joined: Mar 11, 2007
Posts: 2,411
ZUL8TR wrote
I think the biggest take away from this is how they achieved the main winding was of the normal lotus-o-delta type placed in panendermic semi-boloid slots in the stator, every seventh conductor being connected by a nonreversible trem'e pipe to the differential girdlespring on the up-end of the grammeters.

That was and still is some very heavy stuff!

I just realized how strikingly similar this product is to a TurboZUL8TR.
2006 Time Magazine's "Man Of The Year"
Jan 27, 2012, 4:01 am
#4
Joined: Aug 5, 2007
Posts: 2,352
Its true. You can easily spot the treme pipe in this pic!

1983 Datsun 280ZXTurbo
Jan 27, 2012, 4:29 am
#5
Official Carrera GT Slayer


Joined: Mar 22, 2007
Posts: 5,668
All I spotted was the painter tape
the Sledgehammer

2001 Lamborghini Diablo 6.0 - Baby Huey!!! <3
2004 Porsche Carrera GT -Terrorizing society since Oct 16 '09 - DEAD
2001 Acura NSX -SOLD-
Jan 27, 2012, 8:42 am
#6
Joined: Aug 5, 2007
Posts: 2,352
Oh, its just around behind the side in front of the dingle arm. That should make it obvious now.
1983 Datsun 280ZXTurbo
Jan 27, 2012, 10:42 am
#7
Joined: Mar 11, 2007
Posts: 2,411
ZUL8TR wrote
Oh, its just around behind the side in front of the dingle arm. That should make it obvious now.


Completely obvious now, thanks. What if you incorporated a base-plate of prefabulated amulite, surmounted by a malleable logarithmic casing in such a way that the two spurving bearings were in a direct line with the pentametric fan. The main winding was of the normal lotus-o-delta type placed in panendermic semi-boloid slots in the stator, every seventh conductor being connected by a nonreversible trem'e pipe to the differential girdlespring on the 'up' end of the grammeters.

Forty-one manestically spaced grouting brushes were arranged to feed into the rotor slipstream a mixture of high S-value phenylhydrobenzamine and 5% reminative tetryliodohexamine. Both of these liquids have specific pericosities given by P = 2.5C.n^6-7 where n is the diathetical evolute of retrograde temperature phase disposition and C is Cholmondeley's annular grillage coefficient. Initially, n was measured with the aid of a metapolar refractive pilfrometer, but up to the present date nothing has been found to equal the transcendental hopper dadoscope. This has been successfully used for operating nofer trunnions. In addition, whenever a barescent skor motion is required, it may be employed in conjunction with a drawn reciprocating dingle arm to reduce sinusoidal depleneration.

This worked on my MG, BTW, and that car is British.
2006 Time Magazine's "Man Of The Year"
Jan 27, 2012, 11:28 am
#8
Joined: Aug 5, 2007
Posts: 2,352
Of course it would work well for a British vehicle because whenever fluorescent square motion is required, it may also be employed in conjunction with the drawn reciprocation dingle arm, to reduce sinusoidal depleneration.

But you need to remember the Z is Japanese, thus a barescent skor motion is required, it may be employed in conjunction with a drawn non-reciprocating dingle arm to increase sinusoidal depleneration.

There lies the difference between British and Japanese engineering. Let's not even get started on the French and Italian stuff and how they dealt with modial interaction of magneto-reluctance and capacitive directance.
1983 Datsun 280ZXTurbo
Jan 27, 2012, 12:08 pm
#9
Joined: Mar 11, 2007
Posts: 2,411
ZUL8TR wrote
Of course it would work well for a British vehicle because whenever fluorescent square motion is required, it may also be employed in conjunction with the drawn reciprocation dingle arm, to reduce sinusoidal depleneration.

But you need to remember the Z is Japanese, thus a barescent skor motion is required, it may be employed in conjunction with a drawn non-reciprocating dingle arm to increase sinusoidal depleneration.

There lies the difference between British and Japanese engineering. Let's not even get started on the French and Italian stuff and how they dealt with modial interaction of magneto-reluctance and capacitive directance.

I don't know Mark. I mean I see your point. but is seems like an overly simplistic, risky approach void of standard redundencies prevelent in sound horizontal based pressure applications. I'd sure like to hear another opinion before I'd try that on my car. Anyone? Dan??
Jump to