OK, back to the project:
Front end reassembled, composite intake manifold on.
Fully assembled. Hard to imagine all the stuff under that plastic cover.
Without a lift, here is how to do a drop out engine. Hook the engine hoist to the front frame rails,
And set the car down on the engine cradle.
Tight, but it should fit, as it did come out of there!
And keep lowering/checking until the unibody is settled on the 6 subframe mounting points. Now all that remains is hooking up the exhaust, steering coupling, wiring and vacuum lines, fuel and water systems, brakes and bleed, wheels and turn the key.